How do you reset BMW brake light?

How do you reset BMW brake light?

Procedure

1. Turn on the ignition but do not start the car.
2. Make sure time is shown at the center of the instrument cluster.
3. Press and hold the ODO reset button for about five seconds.
4. Press the ODO reset button a few times until you see the symbol for front or rear brakes.

How do you clear a brake light on a dashboard?

Step One: Disconnect the positive cable from your car battery. Then, hold down the brake pedal to drain the vehicle’s electrical system. This will result in a reset of the car’s central computer. Plug the cable back in to restore power.

How do I reset the brake pad sensor on my BMW?

Press the Check button on the steering column stalk until you see the Front Brakes or Rear Brakes symbol. While the brake Brake Light shows on the dashboard, press the BC button until the words RESET show below the brake symbol. The following method shows you how to reset the brake pad sensor on BMW vehicles using various OBD2 Scanners for BMW.

How do I reset the Odo light on my BMW?

If your BMW has a START button, press it without pressing the brake pedal. Make sure time is shown at the center of the instrument cluster. Press and hold the ODO reset button for about 5 seconds. First, a yellow triangle will show on the dash.

Why won’t my brake light reset on my BMW?

The generic OBD-II scanner may not be able to reset BMW CBS and brake light. If you cannot reset the brake light, check the brakes’ condition on the opposite axle. For example, if you replaced the front brake pads and sensor and can’t reset the brake light, you should check the rear brake pads’ condition. Why won’t my BMW brake light won’t reset?

Which BMW models can you reset the brakes?

These steps will work on BMW, including models such as 1-series, 3-series, 5-series, 6-series, 7-series, x1, x3, x5. Perform the following steps quickly. In some cases, you may have to perform the BMW brake reset procedure more than once.