How many liters is a M122?
Additional information
| Water Capacity (lbs) | 47.1 |
|---|---|
| Water Capacity (liters) | 21.4 |
| Diameter (in) | 8 |
| Diameter (mm) | 203.2 |
| Length (in) | 36.2 |
How much boost does a M122 supercharger make?
Equipped with the M122 supercharger, torque production exceeded 500 lb-ft from 3,000 to 4,700 rpm, with a peak of 514 lb-ft. Equipped with the same blower pulley, the TVS supercharger increased the peak boost pressure from 11.5 psi with the M122 to 14.5 psi.
How many liters is a M122 supercharger?
A technicality, but the M122 actually has a 2.0 liter displacement.
What did a M122 supercharger come on?
According to reports on Cadillacforums.com, the EATON M122 superchargers were used on the STS-V and XLR-V cars, but when GM filed bankruptcy in 2009, they left the supplier with over 1,600 of these units, new and unused. They would eventually work their way into the wild through various sales avenues and re-sellers.
What kind of supercharger does the GT500 have?
TVS R2650 supercharger
Eaton’s TVS R2650 supercharger boosts the hand-built and Ford Performance-tuned, 5.2-liter V8 engine that powers the all-new 2020 Shelby GT500.
What size supercharger is on the Terminator?
Terminator supercharger: The Eaton M112 supercharger on the 2003 2004 SVT Cobra Terminator Mustang is known as a positive-displacement supercharger. It displaces 112 cubic inches, or just shy of two liters, and produces approximately 8 psi at full boost in stock trim.
What size supercharger is on a 2011 GT500?
The 2011 Shelby GT500 is powered by an all-new aluminum-block 5.4-liter supercharged V-8 engine, which produces 550 horsepower and 510 ft. -lb.
What size supercharger is on the 2012 GT500?
This complete 2.9L Whipple supercharger kit comes with everything you need to bring your GT500’s total flywheel horsepower up to nearly 725 to 750 horsepower and instantly have your GT500 running insane times at the drag strip or dusting even the most powerful cars on the street.
What type of supercharger is on the GT500?
What kind of fuel rails for M122 supercharger?
Custom billet fuel rails made specifically for the M122 Supercharger. These are designed to work with the 1.502″ length injectors (LS3/LSA). This design actually accomplishes a few things. First, the LSA injector is a proven GM injector with good data and, it is easy to get/cost-effective.
How much does an M122 Super Charger adapter cost?
M122 Super Charger – Intercooler adapter to 12AN Billet adapter converts you to 12AN so that you can route coolant lines to your application. Price: $150.00 Quantity: M122 Super Charger Adapter Flange This flange allows you to adapt a cable driver throttle body to your M122 Super Charger. Perfect for any LS Swap or Hot Rod! Price: $65.00
How many types of Eaton superchargers are there?
Eatons are supplied to OEM automobile manufacturers in the six sizes shown here. Here are some of the more common Eaton automotive supercharger applications. The following Table contains thumbnails of various Eaton superchargers. Click any one to see a larger version on a new page.
How much does an Eaton M122 Cathedral Port Adapter cost?
M122 Cathedral Port Adapter Adapts the Eaton M122 to any cathedral port LS engine. Kit comes with all bolts and gaskets. Price: $1,500.00 M122 Truck HD tensioner and idler kit Your stock tensioner may not hold up to the additional stress and tension needed to maintain good belt wrap.