How much does it cost to replace a sprinkler head?
On average, sprinkler head replacement costs between $65 and $90 to hire a professional, or $2 to $12 per head if you replace them yourself. The cost to install additional sprinkler heads is between $94 and $103. Replacing or relocating sprinkler heads for your entire lawn will cost about $400.
Are there different size sprinkler heads?
There are three basic sprinkler head types– Spray Irrigation Heads and Spray Rotary Sprinkler Heads, Bubbler Irrigation Heads, and Drip or Soaker Systems. Each different sprinkler head will water your plants in the particular way they like.
How do I know if my sprinkler head is bad?
Problems with an irrigation system typically make themselves evident with several common symptoms:
- Individual sprinkler heads not working.
- Low water pressure at the sprinkler heads.
- Sprinkler zones do not turn on.
- Leaking around a zone valve.
- Leak at the sprinkler head furthest from the valve.
How many types of sprinkler heads are there?
four types
All fire sprinklers are one of four types: pendent, upright, sidewall, or concealed.
Can you use different brand sprinkler heads?
While you can mix different brands in the same zone, don’t mix the type of head because they have different flow rates. If your original brand isn’t available, find one with the same specifications, or change all the sprinklers in that zone to match.
How often do sprinkler heads need to be replaced?
Adapted from Table 5.1.1.2 about testing in the 2016 Edition of NFPA 25
| Type | Frequency |
|---|---|
| Sprinklers | At 75 years and every 5 years thereafter |
| Dry Sprinklers | 10 years and every 10 years thereafter |
| Sprinklers (extra high or greater temperature solder type) | 5 years |
| Fast Response Sprinklers | At 20 years and every 10 years thereafter |
Can I mix and match sprinkler heads?
While you can mix different brands in the same zone, don’t mix the type of head because they have different flow rates. Rotor heads, spray heads, matched precipitation etc all throw water at a different rate.
What size sprinkler head do I need?
It is important when planning your sprinkler system to keep in mind that the distance between each rotary head should be less than the PSI supplied to each rotary head. For example: you wish to install a rotary head every 35 ft. This means that you will need at least 36 PSI supplied at each rotary head.
Are all sprinkler heads interchangeable?
A replacement sprinkler head doesn’t have to be the same brand as the broken head. But it does have to be the same type: pop-up (stationary, rotor- or gear-driven rotor) or impact. And the new head must also match the inches-per-hour (iph) or gallons-per-minute (gpm) delivery rate of the old head.