How much does lightweight drywall cost?
Ultralight Drywall Cost Ultralight drywall typically costs slightly more than standard drywall, but not by an amount that is significant for most DIYers. For pros, ultralight tends to run about 20 cents per square foot, while standard drywall runs about 18 cents.
What is UltraLight drywall used for?
SHEETROCK UltraLight Panels are ideal for use on ceilings with up to 24-inch on-center framing and water-based texture, presenting potential cost-savings when used as a replacement for 5/8-inch type X board used on ceilings or 1/2-inch interior ceiling board.
What is the thinnest sheet of Sheetrock?
1/4-Inch Drywall
1/4-Inch Drywall: The thinnest of all the options, 1/4-inch drywall is most commonly used as a skimming material. Mount it over an existing layer of wall to refresh the look and hide old blemishes. It’s ideal for walls with a subtle curve to them.
What is the difference between gypsum board and sheetrock?
 Gypsum is a natural mineral while drywall is a manufactured product. Gypsum is a mineral containing water while drywall consists of gypsum plaster, which contains no water, pressed between two thick paper panels. 3. Gypsum in its natural form is crystalline whereas drywall is not since the plaster is in paste form.
Is ultralight drywall good for soundproofing?
You can use these wallboards anywhere type X boards are not needed to reduce noise or act as fire resistance. You could use the standard 5/8″ drywall where you want a more soundproof room. And use the Ultralight for the rooms where noise reduction is not an issue.
How much does a 4×12 1/2 inch Sheetrock weigh?
However total weights in lbs may differ by size and by brand. By the sheet, standard drywall sheeting comes in at: 4′ by 8′ by ½ is close to 52 pounds 4′ by 12′ by ½ is close to 77 pounds.
How much does 54 drywall weigh?
Standard Drywall Drywall that is 3/8 inch thick weighs 44.8, 56 and 67.2 pounds for a length of eight, 10 or 12 feet, respectively. One-half-inch board weighs 54.4, 68 or 81.6 pounds for sheets of eight, 10 or 12 feet. Boards 5/8 inch thick weigh 73.6, 92 or 110.4 pounds per eight, 10 or 12 feet.
What is an ultra light sheetrock?
Ultralightweight and sag-resistant 1/2 in. (12.7 mm) panels for interior wall and ceiling applications Sheetrock® Brand UltraLight Panels are 1/2 in. (12.7 mm) gypsum panels that feature proprietary core and paper technologies, resulting in a high strength-to-weight ratio composite design.
What are ultralight ceiling panels?
Sheetrock® Brand UltraLight Panels are 1/2 in. (12.7 mm) gypsum panels that feature proprietary core and paper technologies, resulting in a high strength-to-weight ratio composite design. These lightweight panels are also engineered to have superior sag resistance, eliminating the need for traditional 1/2 in. (12.7 mm) sag-resistant ceiling panels.
What is the lightest 5/8 sheetrock?
Sheetrock Brand UltraLight Firecode Core 5/8 in. x 4 ft. x 10 ft.. Gypsum Board is the first and lightest 5/8 in. Type X panel available. This innovative panel is designed to achieve the same superior performance for interior wall and ceiling installations as our standard 5/8 in. Type X, but with significantly less weight.
How do you score USG Sheetrock?
USG Sheetrock Brand panels are specially formulated to ensure easy scoring, clean snapping and enhanced strength from core to face. Measure and mark panel cuts with measuring tape or T-square. Use utility knife to score through paper face and lightly into core.