How often should impeller be changed?
Generally speaking a 5 year interval likely works well for most folks. TomP. Mercury recommends changing the impeller every 300 hours…its in the owners manual. It’s an easy enough job to do yourself if you have some mechanical skills.
How often should you change impeller on outboard?
All impellers should be changed at a minimum of three years. Some will not make it that long depending on many things, how often it is used… too little and it will deform and tend to dry rot. Use it alot and it will wear out from spinning around in it’s housing.
How do you remove the lower unit on a Suzuki outboard?
Pull down on the lower unit gear housing and separate the lower unit, guiding it straight out of the exhaust housing. Remove the last two lock nuts as this occurs. Ease the shift shaft and driveshaft out of the exhaust housing as the lower unit is removed.
How much does a Suzuki 140 outboard weight?
410.00lbs
Specifications
| Type of Engine | 4-Stroke |
|---|---|
| Horse Power | 140 |
| Configuration | In-line |
| Weight | 410.00lbs |
| Fuel Type | Gasoline |
How long will an impeller last?
You should check the impeller’s condition during Spring Commissioning and every 200 hours of operation. Correctly installed impellers may last for several years, but you should stick to a schedule of preventative instead of emergency maintenance.
How long can an outboard impeller last?
How do you remove the lower unit on a Suzuki?
How fast does a Suzuki 140 outboard go?
Accordingly, the wide-open-throttle (WOT) operating range has been increased from 5000 to 6000 rpm for the 115, to 5600 to 6200 rpm for the 140….Suzuki DF140 Specifications and Test Results.
| Horsepower | 140 |
|---|---|
| Shaft Length | 20″ |
| Weight | 410 pounds |
| WOT RPM Range | 5600-6200 |
| Gear Ratio | 2.38:1 |