How to setup TP-LINK TL WA701ND?

How to setup TP-LINK TL WA701ND?

Note：

1. Note：
2. Here we take TL-WA701ND V2 and the information below as a reference.
3. Connect the computer to the AP with an Ethernet cable.
4. Type the username and password into the boxes of the login page, the default username and password both are admin, then press Enter.
5. You will log into the TP-Link Quick Setup page.

How do I access my TP-link AP?

Open the web browser and type the IP address of the access point/extender (Default is 192.168. 1.1/192.168. 1.254/192.168. 0.254) into the address bar and then Press Enter.

How do I setup my TP-Link range extender?

Plug your Range Extender into a power outlet near your main Router/AP. 2. Push the WPS button on your main Router/AP first, then immediately push the WPS button on your Range Extender. Note1: After you have pushed WPS button of your Router/AP, you need to push WPS button of your Range Extender within 2 minutes.

What is the TP-Link password?

admin
The default IP address of TP-Link ADSL router is 192.168. 1.1. Type the username and password in the login page. The default username and password are both admin in lowercase.

How do I connect my TP-Link wa701nd to my computer?

Connect your computer to the TP-LINK WA701ND using a crossover cable and configure the following network address on your computer: • IP – 192.168.0.100 • MASK – 255.255.255.0 Turn on the TP-LINK WA701ND, wait 1 minute and press the reset button located on the back of your equipment for 10 seconds.

How to configure the tl-wa701nd repeater (tl-wa801nd v2/tl- wa901nd and TL- wa701nd)?

Configuration on Repeater (TL-WA701ND V2/TL-WA801ND V2 and TL-WA901ND): Step 1 Connect the computer to the AP with an Ethernet cable. Open the web browser and type the IP address of the access point (Default is 192.168.0.254) into the address bar and then Press Enter.

How do I upgrade firmware for my TP-Link device?

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.

How to Ping the default IP address of the TP-Link equipment?

On your desktop, open a DOS prompt and try to ping the default IP address of the TP-LINK equipment. • IP: 192.168.0.254. Open your browser, enter the IP address of the WA701ND equipment 192.168.0.254 and login using the default username and password.