Is Great Lakes Spa still in business?
discontinued producing the Emerald and Great Lakes spa lines in early 2015. Great Lakes Home & Resort / Great Lakes Spas® / GPM Ind. was sold to Emerald Spa manufacturing, in 2007. The Great Lakes Spa® stopped production of all spas in the spring of 2015.
Who bought Great Lakes spas?
Brand Overview. In 2007, Great Lakes Spas was acquired by the Emerald Spa Corporation, which is headquartered in Kentwood, Michigan.
How do you heat up a Great Lakes hot tub?
Open all the valves to encourage full water flow, and press the temperature set button to raise the temperature if the pump is running with water flow but no heat. Clean out the filter to increase water flow, as well.
Why does my hot tub say SL?
If the SLP or SL Message is ON Solid (Not Flashing) on the Display, the Spa is Operating in the Sleep Heating Mode, but there is No current water temperature because the Spa is between Filter Cycles. The Water Temperature will probably drop Below Set Temperature between Filter Cycles.
How much does a Great Lakes hot tub weigh?
620 lbs.
Great Lakes Spas. Weight 620 lbs./ Capacity 485 gal.
Why does my hot tub jets keep turning off?
When jets start failing, the most likely case is that your hot tub pump is not working correctly. Open the access panel and the airlock valve close to the pump. This releases air from the line and purge system, allowing more water to stream through the jets. Clogged filters or water intakes can also cause jet issues.
What does EC on a hot tub mean?
Ecn or Ec Message Ecn or Ec is Alternating with Temp: The Spa is Operating in the “Economy” (Ecn or Ec) Heating Mode. The Water Temperature is sampled Only during Programmed Filter Cycles. The Heater will only operate and Heat up to Set Temperature during the Filter Cycles.
What does SnS mean on hot tub?
Sensors out of balance
SnS = Sensors out of balance. If alternating with temp, may be temporary condition. If display shows only this message (blinking) spa is shut down. HFL = Substantial difference between temperature sensors detected. Could indicate a flow problem.
What does Dr on hot tub mean?
heater dry
A message such as “dr” or “dry” or “heater dry” is a warning that there’s no water in the heater tube, says Niagara Hot Tubs. If the water is low, add water to the proper level and try restarting the pump and heater.
What does Dr mean on a hot tub?
A message such as “dr” or “dry” or “heater dry” is a warning that there’s no water in the heater tube, says Niagara Hot Tubs. If the water is low, add water to the proper level and try restarting the pump and heater.
Who is behind Great Lakes hot tubs?
Great Lakes Hot Tubs is powered by Canadian Spa Company. We have 40 years of industry experience. We distribute spas around the world, and have been recognized as an industry leader since our first spa was sold a few decades ago. Canadian Spa Company has partnered with Alliance for the Great Lakes.
What are the benefits of a Great Lakes spa?
Combining the oversized intake without any 90 degrees angles in the plumbing creates 35% more efficient water flow. Every one of our Great Lakes Spas also includes a range of quality-of-life features for you. Listen to your favourite music while in your spa and adjust it wirelessly.
Why choose Canadian spa company?
We distribute spas around the world, and have been recognized as an industry leader since our first spa was sold a few decades ago. Canadian Spa Company has partnered with Alliance for the Great Lakes. A portion of the profits of every Great Lakes Hot Tubs purchase will be designated to preserving the Great Lakes.
What is the Alliance for the Great Lakes?
The Alliance for the Great Lakes is a nonpartisan nonprofit organization working across the region to protect our most precious resource: the fresh, clean and natural waters of the Great Lakes. Free of pollution, glaciers contain the world’s most pristine water.