What are nameplate details?
This data tells you at which voltage the motor is made to operate. Nameplate-defined parameters for the motor such as power factor, efficiency, torque and current are at rated voltage and frequency.
What is a generator nameplate?
Generator nameplate capacity (installed): The maximum rated output of a generator, prime mover, or other electric power production equipment under specific conditions designated by the manufacturer.
How do I read my generac model number?
Model Name. The model name of a Generac portable generator is printed on both sides of the generator’s frame (eg. XG8000E, GP6500, EU2000i). The model name is not the model number of your generator.
What is the purpose of nameplate in alternator?
It means the original equipment manufacturer is TDPS. These details are used to contact the material manufacturer for technical discussion, spare procurement, maintenance etc. This is output power of the alternator.
What does the name plate of a DC generator generally indicate?
The nameplate of a dc generator indicates that it will produce an output voltage of 24 V dc when operated at a speed of 1800 r/min.
What are six specifications usually found on the nameplate details of a machine?
The NEC states that the motor nameplate must show the following information:
- Rated voltage or voltages.
- Rated full-load amps for each voltage level.
- Frequency.
- Phase.
- Rated full-load speed.
- Insulation class and rated ambient temperature.
- Rated horsepower.
- Time rating.
How do you calculate nameplate capacity?
The formulas we use is: Nameplate Capacity (kW) = (Percent of Building Load * Annual Building Load (kWh)) / (8760 * Capacity Factor ).
What is on a motor nameplate?
Nameplate-defined parameters for the motor such as power factor, efficiency, torque, and current are at rated voltage and frequency. Application at other than nameplate voltage will likely produce different performance. It is common for manufacturers to nameplate a wide variety of voltages on one motor nameplate.
Which power is mentioned on nameplate of motor?
8. Which power is mentioned on a name plate of a motor? Explanation: Name plate of the motor shows rated values i.e. rated speed, rated current, rated voltage. It also shows output power available at shaft when all other quantities are set to rated values.
How do I identify my Generac generator?
The model name of a Generac portable generator is printed on both sides of the generator’s frame (eg. XG8000E, GP6500, EU2000i).
Where is the name plate on a generator located?
The generator’s nameplate (sometimes referred to as the data tag), is usually located near the control panel or within sight of the observation window on enclosed units. Older generators have metal nameplates riveted directly to the housing, while more modern generators have the information on laminated decals.
What is motor nameplate and where is it located?
Motor nameplate is normally located on all produced electric motors. Understanding nameplate information can be hard sometimes, but is essential. In most countries it is a requirement for manufacturers to display all information on the motor’s nameplate, but often this is not the case.
What do I do if the nameplate is missing on my Generator?
If the nameplate or tag is missing on your generator or it cannot be found contact Cummins Customer Assistance at Cummins Customer Assistance. 24 VDC Battery bank required for generator set application.
What information can I find on an equipment nameplate?
Most equipment nameplates will have some common items of information. Many of these are self explanatory, and include: • Manufacturer • Manufacturerʼs address • Model number • Serial number • Certification mark(s) This general information can be useful in finding out more details about particular through the manufacturerʼs published information.