What axles does a YJ have?

Identifying the axles in YJs is pretty simple since there were no options for it. Every YJ came with a Dana 30 up front and a Dana 35 in the rear. TJ Wranglers will have either a Dana 30 in the front and a Dana 35 in the rear unless you have a Rubicon model. In which case you’ll have 44s front and back.

What axles are in a Jeep Wagoneer?

SJ Wagoneer: Grand Wagoneers, Full Size Wagoneers and Full Size Cherokees/Cherokee Chiefs came standard with Dana 44 front axles, and either the Dana 44 or AMC 20 rear axles.

How wide are Wagoneer axles?

It is exactly 58″ from outside brake rotor to outside brake rotor, there is approximately 1.75″ on each side out to the WMS which gives you 61.5″.

How wide are YJ axles?

These Dana 44s are an almost perfect swap for the rear of any TJ, YJ, XJ, ZJ, WJ, or even a KJ. At 60 3/4 inches wide, this axle is almost the same width as a TJ (61 1/2 inches, wheel-mounting surface to wheel-mounting surface). They are commonly found with Trac-Lok limited slips and either 4.30 or 4.56 gears.

How do I know what rear axle I have in my Jeep?

If your axle numbers aren’t legible, you can always tell what differential your rig is equipped with by simply examining the differential itself. This can be broken down by the distinctive shape of the cover, the number of cover bolts, the number of ring gear bolts, and the ring gear diameter.

How wide is a YJ rear end?

Products specifications

Vehicle Fitment	1987 thru 1995 Jeep Wrangler YJ
Wheel Bolt Pattern	Dual pattern, 5 on 4 1/2” and 5 on 5 ½”, 1/2″ studs installed in 5 on 4 1/2
Brake Space	2.5 inch (axle standoff)
Width	60 inches (between wheel mounting surfaces)
Finish	Unfinished, ready for paint

What axles came in a cj7?

From 1976 to 1980, the CJ-7 used a Dana 20 transfer case, Dana 30 front axle (27- or 31-spline), and an 29-spline AMC 20 rear axle, while in recent years, Laredo package added tachometer, chrome bumpers, tow/recovery hooks and interior, comfortable leather seats, and clock.