What do the lights on my Cisco router mean?
Solid Green Light: Indicates that the downstream channel is connected. Flashing Light indicates the modem is scanning for a downstream connection. Solid Green Light: Indicates that the upstream channel is connected. Flashing Light indicates the modem is scanning for an upstream connection.
Why is my Cisco cable box blinking?
The cable LED will blink when there is activity over the cable network connection. If the cable LED fails to go on, proceed to the section “Troubleshooting the Coaxial Cable.”
What is Cisco 2811 router?
The Cisco 2811 Integrated Services Router is part of the Cisco 2800 Integrated Services Router Series which complements the Integrated Services Router Portfolio.
What is the status of the port speed LED If the LED light is blinking green?
When selected, the port LEDs will display colors with different meanings. If the LED is off, there is no link, or the port was administratively shut down. If the LED is green, a link is present. If the LED is blinking green, there is activity and the port is sending or receiving data.
Why is my Cisco cable box blinking green?
Green light on the adapter is blinking. Unplug the DTA, plug it back in and wait five minutes for it to reset. If doesn’t work, contact Time Warner at (800) 833-2253 with the account number for the property. They can remotely re-set the signal to the adapter.
Why is my Cisco cable box not working?
Reset (power cycle) your receiver by unplugging the power cord from the back of the box. Wait 15 seconds and then plug the power cord back in. Wait up to 20 minutes for the receiver to fully recover and turn it back on.
What happens if I reset my Cisco router?
The factory default reset erases all configuration settings that have been modified by the user, and restores the device to its original settings. This may be helpful if you lose the password to a device and wish to regain access. Performing a reboot restarts the device with a saved configuration.