What does a wet kit do on a semi truck?
Wet kits (also known as wetline kits) are installed on trucks to operate dump trailers, lowboys, live bottom trailers or other specialty applications. A wet kit consists of hydraulic hoses and fittings, reservoirs/tanks, filters, control valves, pumps and PTOs.
How much does a wet kit weigh?
Subject: Re: How much weight does a wet kit add to a semi? the actual pump and lines I would agree at the 150-200 lbs. the big thing is if you need to lift a dump trailer you might need 100 gal of oil(100X10=1000lbs.)
How does a 2 line wet kit work?
A 2-line wet kit, or hydraulic system, is best used in low-usage applications. It consists of its air lines, a pressure hose and a suction hose. The more stress this system experiences, the greater the chances of it breaking down.
What is a diesel wet kit?
Wet Kits (or wetline kits) are kits put into trucks or semi-trucks that have PTO (Power Take Off). They consist of items such as the hydraulic hose and fittings, reservoirs or tanks, filters, control valves, pumps, and PTOs.
What kind of oil do you use in a wet kit?
The trans will use synthetic 50w trans oil, around 30 pints give or take. The wet kit doesn’t need anything special, you could repurpose the tractor stuff, or just buy a pail of a plain antiwear hydraulic fluid, it’s pretty cheap.
What is red hydraulic fluid?
Yes , red is ATF (Automatic transission fluid) and is better for steering systems , trim tabs etc as it has better cold weather properties.
What is ISO 32 hydraulic oil?
AW 32 hydraulic fluids have an International Standards Viscosity Grade or ISO VG of 32. This is the thickness of the fluid tested at 40 degrees Celcius. ISO VG 32 has good cold weather flow capabilities and its thickness is equivalent to a SAE 10 weight lubricant.
Is there a difference between hydraulic oil and hydraulic fluid?
Hydraulic oil and hydraulic fluid are terms that are sometimes used interchangeably, but they are not necessarily the same. While hydraulic oil is a fluid, hydraulic fluid can also consist of other fluids, including plain water, water-oil emulsions and salt solutions.
Can I mix red and clear hydraulic fluid?
Mixing oils with different additive packages is never recommended. Doing so could compromise the additive performance of both constituents, cause corrosion of component surfaces and lead to increased mechanical wear. Flush and change the oil as quickly as possible.
What is a thermaflow unit?
By adding a light weight THERMAFLOW unit to your wet kit, you save considerable amount of weight on your vehicle, allowing you to haul more product. Not only does this unit cool hydraulic oil, it also stores and filters the oil as well, eliminating the need for huge tanks housing large quantities of oil.
What is a 934 Wet kit?
Being that it is extremely versatile, the 934 can be found all over the country on a wide array of wet kits, supporting all kinds of applications such as… chemicals, compressed gasses, food grade, crude oil, vacuum pumps and combo drives. The THERMAFLOW 934 hydraulic oil cooler for trucks is the heart and soul of the surrounding wet kit.
What is the difference between the thermaflow 934 and the SS600?
At only 9.25″ wide, the THERMAFLOW 934, will fit all of your applications. The model 934 will drive most 3″ and 4″ product pumps and compressors, with options for multi-pump applications. The 934 Model uses almost the same exact parts as the SS600 Model. Allowing you to keep stocking the same part number as you always have.
Why get your wet kits through Stac?
By getting your wet kits through STAC, Inc, you save hours of your precious time and potentially thousands of dollars from properly speced components that will give you the longest life and most efficiency when unloading. STOP fighting with your system and START your partnership with STAC, Inc TODAY! STAC, INC.