What does f8 E3 mean on my Whirlpool washer?

What does f8 E3 mean on my Whirlpool washer?

The F8E3 Error Code indicates that there may be an internal overflow from the water inlet valve. Verify that the drain hose and drain pump filter are not plugged.

What does F5 E3 mean on a Whirlpool washer?

The F5 E3 alert indicates there is issue with the lid lock. Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.

How do I put my Whirlpool Duet in diagnostic mode?

Whirlpool Duet Diagnostic Test Mode Close the washer door. Select any one key except “Stop/Cancel” and Control Lock. If you got it right all the lights on the Duet washer’s control should light up, and any error codes in the washer’s memory will be displayed.

How do I fix E3 error on my Whirlpool washer?

E3 – Unbalanced alarm This could be caused by the washer being too tightly packed, or clothing not distributed evenly. This will usually occur during the spin cycle. Stop the spin cycle. Remove several items, rearrange load evenly around the washplate, and restart the Spin cycle.

How do I fix F8 error on washing machine?

If F8 E1 or LF (too long to fill) appears in display, it means the washer is taking too long to fill. It’s possible the drain hose extends more than 4.5″ (114 mm) into standpipe. Check plumbing for correct drain hose installation. Use drain hose form and attach securely to drainpipe or tub.

How do you reset the F5 code on a Whirlpool washer?

When using hot water in a Whirlpool washer, you may encounter the “F5” error code on the appliance. To finish the laundry load, reset the washer, wash in cold water and then fix the error to use hot water again.

How do I reset my front load washer?

How to reset the washing machine:

1. Press POWER to turn the washer off.
2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
4. Plug the washer back in, or turn the circuit breaker back on.

How do I reset my Whirlpool Duet front load washer?

Unplug the washer for 30 seconds to attempt to reset the Duet washer control. if your fill hoses have a flood stop check valve turn the water off, disconnect the hoses and run a little water into a bucket. Then reconnect the hoses to your washer and do a Duet Washer Quick Diagnostic Test.

What does f8e2 mean on a whirlpool washer?

If the end of the drain hose is below the water level in the washer, water can siphon out as fast as it goes in. Check water valve electrical connections before changing out the valve. F8E2 Error Dispenser fault.

What does error code f2e3 mean on duet washer?

F2E3 Error – Cycle fault. This is a rare one but it means that something is wrong with the washer cycle that was selected. Put your Duet washer through the UI Tests, and check all of the connections to the control. your washer may need a new main control board. F3E1 Error – Pressure switch/ sensor fault.

What does F3 mean on a whirlpool washing machine?

F3 faults are washer sensor related problems. F5 faults are door lock and door switch related duet codes. F7 Faults are motor and motor control related problems. F8 Faults are water related… valve, dispensing system, water level, steam valve, and flow meter problems. Lastly F9 faults are related to the washer’s ability to drain.

Why does my duet washer keep saying F21?

The next most likely cause is that the washer’s water valves are not opening for some reason. This is the most common Duet washer error code! The F21 long drain error is referring to duration not length.