What does JTM 45 stand for?
It’s the amp that started it all, the Jim Terry Marshall 45, more commonly known as the JTM® 45. But rewind to 1962 and the amps available in the UK just weren’t cutting it for the grit driven rockers of the time.
Who used Marshall JTM 45?
That’s the case with this month’s featured amp: a 1964 Marshall JTM45 4×10 combo that was owned and played by Peter Green during his years with Fleetwood Mac, and potentially with John Mayall’s Bluesbreakers. It is a beast!
Is a Bluesbreaker a JTM45?
The 1962 Bluesbreaker is a reissue of the classic Marshall JTM45 amp, which only use 30 watts of power to create its epic tones. But 30 watts is perfect for live use in small to medium sized venues, and it’s ideal for recording.
What is a Marshall Black Flag?
The Black Flag JTM50 is a rather rare and coveted after amplifier made by Marshal between 1966 and 1967. It was one of the transitional steps between the JTM45 amps and the plexi panel JMPs and later metal faces. At some point, Marshall started to offer 3 versions of the JTM45 – Lead, Bass and PA.
What does JTM stand for Marshall?
Jim
Marshall started building amps in 1962. Their first model was called JTM45, a copy of (or inspired by) the Fender Bassman. JTM stands for Jim and Terry Marshall, Terry being Jim’s son) At some point, Marshall started to offer 3 versions of the JTM45 – Lead, Bass and PA.
Why is Marshall called Plexi?
The name originates from its shiny, Plexiglas panel, commonly used on Marshall amps between 1965-1969. The 68 specification amps were a hit with Jimi Hendrix, Cream and The Who, creating huge amounts of exposure and marking the ‘Plexi sound’ as the sound of rock.
What tubes are in Marshall Plexi?
Preamp tubes: three ECC83 (12AX7) for first gain stage, cathode-follower tone stack, and “long-tailed pair” phase inverter. Output tubes: initially two EL34; Class AB, fixed bias.
Are 6L6 and 5881 tubes the same?
You can immediately notice that the 6L6 and 5881 are in the same family of valves. They are part of the general evolutionary process for this particular valve. So they are similar, but not identical tubes. In other words, there are no 6L6 tubes which are identical to the 5881 tube.
How many inputs does a Marshall JTM45 have?
Using the four loudness inputs and two loudness options you can mix your sound together to generate a loud blend of crunch and clean. The clean and warm tones of a first Marshall can marry well with an array of FX pedals. It’s the amp that started it all. Discover the history of the JTM45.
What makes the jtm45/100 so special?
The JTM45/100’s organic, vibrant, sweetly distorted, harmonically rich and thick musical tone emanates from its power valves being driven into a dual 50 watt output stage. When ‘cranked,’ the JTM45/100 produces its own unique roar with an inspiring ‘punch you in the chest’ clout.
When was the first Marshall amp made?
In 1962, in a small shop in Hanwell, Jim Marshall created and began selling the first Marshall amp, a JTM ® 45. From this the Marshall sound was born. This reissue meticulously replicates this original Marshall sound. Using the GZ34 valve rectifier, it works with the ECC83 and 5881 valves to generate the harmonic and unmistakable Marshall tone.
How many Transformers does a JTM 250 have?
The JTM45/100 Limited Edition run of 250 is an all-valve, 100 Watt head and two 4×12 cabinet setup. It uses two 50 Watt output transformers in its power section, just like the original did in 1965. It was the very first appearance of what has now come to be known as the 100 Watt ‘stack.’