What does the maintenance required light mean on a 2000 Acura TL?

What does the maintenance required light mean on a 2000 Acura TL?

The “maintenance required” light is programmed to come on every 7,500 miles, reminding you to bring your Acura TL in for its scheduled service (oil change and tire rotation).

What does maint reqd mean Acura?

For the first 6000 miles after completion of scheduled maintenance and indicator light reset, the MAINT REQD reminder light will illuminate for 2 seconds when ignition is turned to ON position. After exceeding 7500 miles without having scheduled maintenance performed, light will remain on until it is reset.

How do you reset the maintenance light on a 2000 Acura TL?

To reset the 2000 Acura TL maintenance light, please follow these instructions:

1. Turn the key to off position.
2. Press and hold the SELECT and RESET buttons on the instrument panel and turn the ignition to position (II) – do not start the engine.
3. Hold the SELECT and RESET buttons until the indicator resets.

What happens if u don’t get an oil change?

Go long enough without an oil change, and it could eventually cost you your car. Once motor oil becomes sludge, it no longer draws heat from the engine. The engine might overheat and either blow a gasket or seize up. If the heat doesn’t cause a gasket to blow, it will warp the parts in your engine.

How do you reset the maintenance required light on a Acura TL?

Press and hold the SELECT and RESET buttons on the instrument panel. Turn the ignition to position (II) do not start engine. Hold the SELECT and RESET buttons until the indicator resets, 10 seconds. Turn ignition off and then start the engine to verify the indicator has been reset.

Is it safe to drive with maintenance light on?

This light is turned on automatically every 5,000 miles as a warning sign, so you don’t forget to change the oil in your car. It’s important to know that the light itself doesn’t mean that your car is damaged, so you can still safely use your vehicle while the light is on in your dashboard.

Will disconnecting the battery clear codes?

Leaving the battery disconnected for about 15 minutes will ensure the vehicle systems will completely reset when you reconnect the battery. Secure the negative cable back to the terminal and cover it with the cap (if applicable). Disconnecting the battery will clear the error codes and reset the check engine light.