What fasteners to use with cedar?

What fasteners to use with cedar?

Stainless steel is the best choice when using western red cedar. Hot dipped galvanized is the most widely used (and one of the most economical fasteners), and aluminum is an option, too. These fasteners are all corrosion-resistant.

Can you use hidden fasteners on cedar decking?

Hidden fasteners can be used with composite, vinyl, cedar, ipe or other exotic hardwood material. You should verify that hidden fasteners are compatible with your choice of decking boards before ordering.

Can you use stainless steel screws on Cedar?

Hot-dipped galvanized, aluminum and stainless steel nails are all corrosion-resistant and all can be used to nail Western Red Cedar. Other types of nails, such as electroplated, are not recommended. Stainless steel is the best choice but hot-dipped galvanized is the most widely used and economical.

How do you secure a cedar deck?

There are three good fastener options for cedar decking in my opinion:

1. 1) Hot-dipped galvanized (Maze) nail– most common and least expensive.
2. 2) Collated stainless steel deck screw– I really recommend the one made by Pam screws.
3. 3) Hidden fastener– Cedar is a very stable material.

How do you fasten a cedar deck?

Can you use screws on cedar siding?

Do not use common nails or screws. Use of these will lead to eventual bleeding of rust over time, causing an unsightly stain in the cedar siding. Use only hot dipped galvanized, aluminum, or stainless steel nails or screws when fastening Western Red Cedar.

Should I leave a gap between cedar deck boards?

Dry material should be spaced a full 1/4 inch apart to prevent damage to the boards as the material absorbs moisture. The gap will naturally close and widen throughout the year as the weather and seasons change. The space between the ends of boards should always be 1/8 inch.

Can you use GRK screws in cedar?

Typical applications for 305 stainless are in corrosive environments such as lakes, pools, spas, decks, and boardwalks. Compatible with most wood types including cedar, redwood and ipe.

How do you attach deck clips to deck boards?

Many manufactured decking materials offer deck boards that are sold with a grooved edge for use with hidden fasteners. You can also router the edges of solid deck boards to create a slot to accept deck clips.

What kind of deck clips do TimberTech use?

ConceaLoc: Timbertech manufactures this hidden deck clip to work with its XLM, Earthwood Evolutions and Twin Finish grooved deck boards. The stainless steel clip is brown and allows for a 1/8” to 3/16” deck board gap.

Can I use Trex Hideaway clips on a composite deck?

Trex also offers a starter clip for use along the house wall and front edges of your deck, where you won’t be able to fit a standard Hideaway clip. You can purchase a groove cutter to router a slot on the side of solid composite deck board edges. Trex Hideaway hidden deck fasteners are also designed to work with the Trex Steel Frame System.

What size do concealoc deck clips come in?

The stainless steel clip is brown and allows for a 1/8” to 3/16” deck board gap. The clips come with stainless steel screws. You can purchase ConceaLoc clips in 175, 900 or 1750 count containers and compatible drill and router bits.