What is a kerf bend?
Kerf bending is the process of cutting a number of slots into a piece of material that allow it to bend. Essentially, by kerfing the part, you are making it thinner, so it can be flexed to follow a curve. While this method is not very strong, it does allow for easy forming of wide or tall parts.
How do you use kerf bending glue?
Glue up the mating surfaces and clamp the parts together. To avoid gaps, start clamping from the center and work outward, or from one end to the other. This allows you to work gaps out as you go. Kerf bending is the process of cutting a number of slots into a piece of material that allow it to bend.
What is a keykerf bending saw?
Kerf bending is the process of cutting a number of slots into a piece of material that allow it to bend. Essentially, by kerfing the part, you are making it thinner, so it can be flexed to follow a curve. While this method is not very strong, it does allow for easy forming of wide or tall parts. Nearly any saw can be used for kerfing.
What is the meaning of kerf spacing?
Kerf spacing determines the minimum bending radius for a piece of stock. (When the kerfs close on the inside, the piece won’t bend anymore.) But bending the part until the kerfs close often produces visible flats on the outside surface, as shown on Drawing 2, below.