What is a switch pitch TH400?
From 1965 to 1967, GM installed switch-pitch torque converters in many of its TH400 transmissions. This arrangement hydraulically alters the angle of the fins on a converter’s stator, thereby increasing or decreasing stall speed by as much as 1,000 rpm on the fly.
How much is a torque converter for a 400 transmission?
Compare with similar items
|This item Assault Racing Products 600017 GM TH400 Torque Converter 3200-3500 Stall Turbo 400||Allstar-26904 10″ Diameter TH-350/400 Transmission 3500+ RPM Stall Speed Torque Converter|
Do torque converters add power?
An automatic transmission in general has a way of soaking up horsepower, but the torque converter can take a potent combination and turn it into a pig when the rubber meets the road. And while stall speed is important for a good launch, it’s also a place for horsepower to swirl down the drain.
What is the fluid capacity of a TH400 transmission?
|Transmission Fluid Capacity|
|Transmission (w/ Stock Pan)||# of Quarts|
How much is a Turbo 400 transmission?
Compare with similar items
|This item Gm Turbo 400 Transmission TH400 Stage 2 Race Up to 650 HP||GM Turbo 400 Transmission Stage 3 Race with Trans Brake 800HP|
|Add to Cart||Add to Cart|
|Sold By||Patriot Transmission & Performance||Patriot Transmission & Performance|
What are the disadvantages of torque converter?
Torque converters are, therefore, less fuel efficient than a manual gearbox or a CVT. Pros: Refined, smooth, reliable; more responsive than a CVT. Cons: Not the most fuel efficient; expensive. Cars offered with Torque Converter: Hyundai Creta AT, Maruti Suzuki Ciaz AT, etc.
Will torque converter make car faster?
Likewise, changing the torque converter to a higher stall speed increases torque multiplication and allows the engine to reach its powerband quicker. By installing a torque converter that flash stalls to 2,500 rpm, the engine is allowed to reach its optimum hp range quicker and will therefore perform much better.”
How much fluid does a TH400 torque converter hold?
You can expect to use between 11 and 12 quarts of fluid in the stock version.
How many gears does a TH400 transmission have?
TH-400 transmissions are three-speed automatics, with a 2.48:1 first gear. Reverse gear is 2.08:1 and third gear is an even 1 to 1. Turbo 400s use three tail shaft lengths; the most preferred units for a GM swap would have the short 4-inch tail shaft.
Does a TH400 transmission have overdrive?
Some refer to the 4L80E as the TH400 with an overdrive ratio, as much of the internals are interchangeable. TCI has a complete line of 4L80E transmissions in the Street Fighter and Super Street Fighter trim levels.
How many forward gears does a TH400 have?
To make it easier for buyers to recognize the transmission, the TH400 was renamed in 1990 to the 3L80. As with other transmissions, the naming scheme tells what the part can do. The “3” means it has three forward gears and one reverse.
Are torque converters reliable?
This technology has been around for long enough to have been made very dependable. The downside is that the torque converter isn’t actually a very efficient way of transferring the engine’s power.
What is a switch pitch torque converter?
The name switch pitch comes from the vanes in the torque converter being able to change their angle (pitch) in order to reduce friction (force) and get the vehicle moving. This would be similar to somebody trying to start pedaling a ten speed in 10th gear versus 1st or 2nd gear.
Can I convert a TH400 trans to a SP converter?
The best bet is to remove the entire trans. and then convert a shortshaft TH400 to the s.p. converter. All 1973-77 Pontiac Grand Prix cars have shortshaft TH400 and are quite common.
How much torque does a THM400 put out?
A 68 up THM400 or 425 trans uses a 3 element torque converter, which at stall (vehicle not moving yet) puts out about 2 times the engine input torque. As rpm and output speed increase, that gradulally reduces from 2:1 to 1:1, stretching the useful range of each gear.
What is a switch pitch transmission?
Itching for a Switch Pitch Transmission. The name switch pitch comes from the vanes in the torque converter being able to change their angle (pitch) in order to reduce friction (force) and get the vehicle moving. This would be similar to somebody trying to start pedaling a ten speed in 10th gear versus 1st or 2nd gear.