What is Cisco Aironet 3700?

What is Cisco Aironet 3700?

The 3700 is a series of flagship access points, delivering industry-leading performance for highly secure and reliable wireless connections and delivers a robust mobility experience that includes: Optimized AP Roaming ensures clients will associate with the best AP offering the best data rate available.

Can I use Cisco AP without controller?

You can start to buy some of this ap and use them standalone, when you are ready to buy the wireless controller, you can change the firmware on the ap and join them to the wireless controller. If you want to use as standalone, you will need to purchase IOS from Cisco to make it work without a controller.

What is air CAP3702I a K9?

Cisco 3702i Overview Provide extensive network access to multiple users with the AIR-CAP3702I-A-K9 Aironet 3700 Series Access Point with Internal Antennas from Cisco. This access point supports the 802.11ac wireless networking standard and operates on both the 2.4 GHz and 5 GHz frequencies.

What is difference between lightweight and autonomous access point?

Autonomous access points are far and away more common than their lightweight counterparts. The controller in the WLAN is what distinguishes it from lightweight access points. As the name autonomous implies, the controller allows the single device to manage traffic independently from any additional support.

What is Cisco lightweight access point?

The Cisco Aironet 1000 Series Lightweight Access Point is an 802.11 a/b/g dual-band, zero- touch configuration and management access point that delivers secure, cost effective wireless access with advanced WLAN services for enterprise deployments.

How do I reset my Cisco AP 3700?

Enter the command delete flash:private-multiple-fs….Reset Cisco Wireless AP to factory defaults

1. Connect the console cable.
2. Unplug the power or network cable if connected to a POE switch.
3. Press and hold the Mode button.
4. Plug the power back into the AP.
5. Wait until the output on the console says button is pressed.

How do you convert Cisco AP to lightweight?

Autonomous to Lightweight conversion (CLI and TFTP)

1. Step 1: Download the CAPWAP (or LWAPP if your AP does not support CAPWAP) file matching your access point model from Cisco.com.
2. Step 2: Prepare the AP for TFTP code upload.
3. Step 3: Transfer Lightweight recovery image to the AP using TFTP.

How do I know if my Cisco AP is lightweight or autonomous?

Autonomous APs have in their image name: K9W7 while Lightweight APs have K9W8. You can display the information using CLI command “show version” over Console / SSH / Telnet. If there is “LAP” or “CAP” in the part number, the AP is shipped in Lightweight mode.

What is the Cisco 3700 series access point?

The Cisco 3700 Series Access Point (AP 3700) targets customers requiring support for mission-critical applications.

Will the AP 3600 support the AP 3700?

There is also an option module for the AP 3600 that provides 802.11ac (Wave-1) functionality. This option cannot be used on the AP 3700 because it already has 802.11ac (Wave-1) integrated. This option module for the AP 3600 will operate at 5GHz and allow the AP 3600 to fully support 802.11a/n along with 802.11ac clients.

Does the AP 3700 or AP 3600 support 11a/g/N beamforming?

Both the AP 3700 and AP 3600 with module supports the 802.11ac beamforming standard known as ECBF (Explicit Compressed Beam Forming)–a new IEEE method of beamforming that is emerging but not yet fully supported in 11ac clients. Cisco ClientLink is similar but can work with all clients today including 11a/g/n as well as 11ac clients.