What is feather finish screed?
ARDEX FEATHER FINISH is an ultra rapid drying patching and smoothing compound, which provides a high bond strength to concrete, plywood, sand/cement screeds, existing smoothing compounds and ceramic tiles, without the need to prime. USE.
What is feather finish used for?
ARDEX FEATHER FINISH® is an underlayment formulated from a blend of Portland cement and other hydraulic cements that provides a smooth, permanent finish for a variety of substrates prior to the installation of today’s demanding floor coverings, including sheet vinyl and VCT (vinyl composition tile).
What does feathering a floor mean?
English translation: applying material to concrete floor to even it before putting in other flooring.
How long does feather finish take to dry?
Allow thorough drying to a clear, thin film (min. 3 hours, max. 24 hours). NON-POROUS SUBSTRATES: ARDEX FEATHER FINISH will bond to some non-porous substrates, such as burnished concrete, terrazzo, and ceramic and quarry tile, without the use of a primer.
What is feather edge concrete?
ProSpec Feather Edge is a trowelable, rapid setting, polymer- modified, cement-based patch and skim coating compound that results in an ultra-smooth, thin finish applied under resilient flooring, VCT and a wide array of floor coverings. Features and Benefits. • Featheredge up to 1/2” (13 mm) thickness without cracking.
Is feather finish waterproof?
ARDEX FEATHER FINISH – Laminate Floors and Waterproof Flooring-Carpet-Wood-Tile-Parquet-Soundproofing-Vinyl-Porcelain in Miami Florida Talula Floors.
Will feathers stick to wood?
ARDEX FEATHER FINISH allows the installation of most types of floor covering in as little as 15 minutes over all types of interior concrete, masonry, wood, terrazzo, and ceramic and quarry tile – as well as properly prepared residues of cutback and other non-water-soluble adhesives on concrete – all without the need …
What is feather edge in flooring?
Feather Edge is a quick drying, trowel applied smoothing compound. It is a blend of specially selected aggregates, cements and polymers to give a very fast setting, cementitious flooring skim coat.
Can you paint over feather finish?
Yes. You should sand before applying each coat. A light sanding should do if you applied it smoothly. The final coat when dry should be sanded as smooth as possible before putting on color or sealant.
How thick is feather edge in concrete?
TEC® Feather Edge Skim Coat is a high quality, cement-based compound designed to skim coat, smooth and level irregularities from featheredge up to ½” (12 mm). Rapidly sets to install most floor coverings in as little as 15-20 minutes, with exceptional performance. TEC® Feather Edge has superior bond strength.
Can I paint feather finish?
What is Ardex feather finish used for?
DESCRIPTION ARDEX FEATHER FINISH is an ultra rapid drying patching and smoothing compound, which provides a high bond strength to concrete, plywood, sand/cement screeds, existing smoothing compounds and ceramic tiles, without the need to prime.
How long does it take for feather finish™ to dry?
Needing no priming and with Ardurapid fast dry technology, ARDEX Feather Finish™ is ready to receive floor coverings in as little as 15 minutes. Floor Coverings:
What is a cement screed?
Cement-based Screed. Cement screed is a covering and straightening layer also called CT according to DIN EN 13 813. Cement screed is also called concrete screed, as the ingredients are approximately the same. Sand and cement are used, for example in a mixing ratio of 3:1.
How thick can a screed be?
If you are working with a smoothing compound, then that can be anything from feather-edge through to 5 mm. A modified sand and cement screed can be from 10 mm through to about 40 mm for a traditional screed, where bonding is required.