What is SAE 660 bronze?
SAE 660 Bronze or C93200 as it also commonly known is a high-leaded tin/ bearing bronze. This Bronze has good hardness and strength qualities as well as good wear resistance, it also has excellent machining properties and anti-friction qualities.
What is density of C93200 bronze?
Physical Properties
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.93 g/cm3 | 0.323 lb/in³ |
What is C93200 bronze?
C93200 Bronze is a general purpose bearing alloy possessing good anti-friction properties, ample strength and hardness, adequate ductility and excellent machinability. It is used as bearings, bushings, light duty gears and sprockets, impellers, wear strips, plates, automotive fittings and washers.
Which alloy has good bearing properties?
Bronzes are unquestionably the most versatile class of bearing materials, offering a broad range of properties from a wide selection of alloys and compositions.
What type of alloy is bronze?
copper
What Is Bronze? Bronze is a copper-based alloy that typically consists of approximately 88% copper and 12% tin. Trace amounts of other metals, such as aluminum, manganese, phosphorus, and silicon, may also be present in the alloy.
What is the difference between c93200 and c93700?
This need for innovation brought us Copper Alloy C93200 SAE 660 Bearing Bronze. C93200 utilizes a combination of Tin and Zinc for strength, while C93700 relies solely on Tin. This combination reduced the amount of Tin needed to produce bronze bearings and proved to be cost effective. C93200 is composed of 83% Copper, 7% Tin, 7% lead, and 3% Zinc.
What is a c93700 bronze?
C93700 bronze is a bronze formulated for casting. Cited properties are appropriate for the as-fabricated (no temper or treatment) condition. C93700 is the UNS number for this material. Additionally, the common industry name is 80-10-10. Older literature may refer to this material as ASTM Alloy 3A, Alloy C, or SAE 64.
What is c93700 SAE 64?
C93700 SAE 64 is a Leaded Tin Bronze. It is sometimes referred to as 80-10-10 Bronze. This references the chemical composition of 80 % Copper, 10 % Tin, and 10% Lead. C937 utilizes the Tin to add strength to the alloy.
What is the UNS number for c93700?
C93700 is the UNS number for this material. Additionally, the common industry name is 80-10-10. Older literature may refer to this material as ASTM Alloy 3A, Alloy C, or SAE 64. It has a very low melting temperature among cast bronzes.