What is Vpulse in PSpice?

What is Vpulse in PSpice?

A voltage pulse or pulse train can be applied as an independent source in PSPICE using the VPULSE element. VPULSE has seven parameters that describe its shape as shown in figure 1. Note that the voltage input is a single 1-volt pulse that is 1 second in duration.

What is TD TR TF PW per?

pulse(V1 V2 TD TR TF PW PER) where. V1 = the initial amplitude V2 = the pulse amplitude TD = the delay time in seconds TR = the rise time in seconds TF = the fall time in seconds PW = the pulse width in seconds PER = the period in seconds An example of such a pulse generator is shown below.

What is PSpice stand for?

Personal Simulation Program with Integrated Circuit Emphasis
PSpice is an acronym for Personal Simulation Program with Integrated Circuit Emphasis.

How do you run transient analysis in PSpice?

Select PSPICE → New Simulation Profile. Name the profile “transient”. Select Time Domain (transient) for the Analysis type. There are several other important settings for the transient analysis.

How do I add voltage source to pspice?

Sources are in the SOURCE library. To add it, click the “Add Library” icon, circled in green above. A second dialog opens with a list of libraries. (Several libraries come available with PSPICE, and these have all of the components we will use in EE 201.

How do you get output waveform in pspice?

Add the waveform for output voltage on this axis by clicking on the Add Trace icon, and selecting Vout from the trace list. PSpice has the ability to retrieve the previous plot settings, even when you make any changes to the schematic. Enable last plot from the Probe Window settings in the simulation setup.

What is pulse in electrical engineering?

A pulse in signal processing is a rapid, transient change in the amplitude of a signal from a baseline value to a higher or lower value, followed by a rapid return to the baseline value.

What is voltage pulse?

A pulse is a burst of current, voltage, or electromagnetic-field energy. In digital circuits, pulses can make the voltage either more positive or more negative. Usually, the more positive voltage is called the high state and the more negative voltage is called the low state.