What is WPS access point on Canon mx532?

Some access points (often called routers or hubs) feature an automatic connection button labelled “WPS” which stands for Wi-Fi Protected Setup and allows permitted devices to connect to your network without needing to enter a password.

Where is WPS access point on Canon printer?

The WPS button is not on the printer. This button would be located on your router itself. If your router does not have a clearly marked ‘WPS’ button, please use the CD with your computer to perform the standard wireless installation.

Where do I find the WPS PIN on my canon mx532 printer?

Solution

Press the Setup button.
In the Setup menu, Wireless LAN setup is the first option.
Press the right arrow button until WPS appears.
Press the right arrow button until PIN code method is shown on the screen.
After a few moments, a PIN code will appear on the screen.

How do I connect my Canon printer to WPS?

Use WPS to set up your printer

Swipe across the touch screen display area, then tap WLAN.
The printer searches for a wireless router.
Press and hold the WPS button on the router (about 5 seconds), then tap OK on the printer within 2 minutes.
Tap OK when Connected to the access point appears.
The connection is complete.

How do I setup my Canon Pixma mx532 wireless printer?

Wireless Connection

Make sure that the printer is turned on. If the power is on, the (green) POWER button (A) will be lit.
Press the Setup button (B) on the printer.
Use the or. button (C) to select Wireless LAN setup.
Press the OK button (D).
The printer will automatically search for compatible access points.

How do I connect my Canon printer to an access point?

Enable access point mode

Make sure the printer is turned ON.
Press and hold the Wi-Fi® button on the printer until the Alarm lamp flashes 3 times.
Release the Wi-Fi button. When the ON lamp changes from flashing to lit, access point mode is enabled.

How do I scan with Canon mx532?

Scanning Documents

Place the item on the platen. Placing Items (When Scanning from a Computer)
Start IJ Scan Utility.
Click Settings…, then set the paper size, resolution, etc. in the Settings (Document Scan) dialog as required. When setting is completed, click OK.
Click Document. Scanning starts.

What is WPS on Canon printer?

If your Wireless access point or router supports WPS, you can easily connect your Canon wireless printer to your home network. Wi-Fi Protected Setup® or WPS is a method that allows you to easily connect network devices to a secure wireless network. In some cases, a WPS button is labeled.

How do I connect the Pixma mx532 via WPS PIN code?

Some wireless routers will allow you to connect devices via a WPS PIN code. Follow the steps below to begin a wireless connection setup using the WPS PIN code method for the PIXMA MX532. Press the Setup button. In the Setup menu , Wireless LAN setup is the first option. Press the OK button. The printer will search for nearby wireless networks.

How do I connect to my printer via WPS?

Use the or button to select Wireless LAN setup, then press the OK button. If a WPS Access Point is detected, Press WPS button about 5 sec and press [OK] of the device** will scroll across the display. ** The WPS button referred to is a button on the router / access point (or option within the Router / Access Point sotware) , not the printer.

How do I connect my canon Pixma printer to Wi-Fi?

Press and hold the WPS button on the access point about 5 seconds, then press OK on the printer within 2 minutes. The Connected screen displays on your printer. The blue Wi-Fi lamp flashes while looking for and connecting to the router. Press the OK button when you see the Connected screen.

How to configure WPS to connect to WiFi?

Use the or button to select Wireless LAN setup, then press the OK button. If a WPS Access Point is detected, Press WPS button about 5 sec and press [OK] of the device will scroll across the display. Press and hold the WPS button on the access point (about 5 seconds), then press the OK button on the machine within 2 minutes.