What kind of oil does a Detroit 60 series take?
The preferred lubricating oil is Shell Rotella SAE 15W-40 (CJ-4). Synthetic oils may be used in Detroit Diesel engines, provided they are approved by a Power Guard Oil Specification. The use of synthetic oil does not necessarily ensure the extension of the recommended oil drain interval beyond its limits.
How much oil does a Series 60 Detroit hold?
Install both engine oil filters. Fill the engine with 40 quarts of fresh engine oil (the oil that was pre filled into the oil filters is included in this amount) Reinstall engine oil cap.
How much horsepower does a 60 series Detroit have?
Detroit Diesel Series 60
| Series 60 | |
|---|---|
| Power output | 330–605 hp (246–451 kW) at 1800–2100 rpm (11.1 L) |
| Torque output | 1,150–2,050 lb⋅ft (1,559–2,779 N⋅m) at 1200 rpm (11.1 L) |
| Dimensions | |
| Length | 57 in (1,400 mm) (11.1L) |
How do I get more power out of my 60 series Detroit?
Go to your local dealer to have them download the current software to your engine’s computer. Replace the factory air filter with a performance version to allow more air to flow through the engine. Change the air filter anyway every few thousand miles as a filter that is clogged will decrease your horsepower.
What is cj4 oil?
API Service Category CJ-4 describes oils for use in high-speed four-stroke cycle diesel engines designed to meet 2007 model year on-highway exhaust emission standards as well as for previous model years. CJ-4 oil with higher than 15 ppm sulfur fuel, consult the engine manufacturer for service interval.
Is the Detroit series 60 A good engine?
Though the Detroit Series 60 has its issues, it is a very reliable engine and has less to worry about than modern trucks.
How many liters is a 60 series Detroit?
12.7 liter
The Detroit 12.7 liter 60 series engine is widely known for its durability and longevity in the trucking Industry.
How much horsepower can you get out of a 12.7 Detroit?
Horsepower and Torque The 12.7L only has a horsepower capacity of 380-455 at 1,800 RPM, while the 14L is a bit higher at 425-515 at the same RPM. Similarly, the rated torque on the 14L increased, coming in at 1,550-1650 lb-ft. at 1,200 RPM, up from 1,350-1,550 lb-ft on the 12.7L.
What kind of oil do you use in Detroit Diesel engines?
Only oils licensed by API may be used in Detroit Diesel engines. Lubricants meeting API Service category CH-4 are intended for use primarily with low (0.05%) sulfur fuel and may be used in all Detroit Diesel Series 60 engines.
What kind of oil do you put in a DDC engine?
At ambient temperatures below -20°C (-4°F) when sufficient starter speed cannot be achieved with SAE 15W-40 oils, the use of 5W-XX and 10W-XX oils, where XX is 30 or 40, may be used to improve startability provided they are API CH-4 and have demonstrated field performance in DDC engines. These oils must possess a HT/HS of 3.7 minimum.
How long can an engine operate before changing oil?
The length of time an engine may operate before changing oil depends on the lubricant and fuel used, engine oil consumption, and operating cycle. The maximum interval the engine may operate before changing oil is listed in Table “Maximum Oil Drain Intervals” .