What kind of oil does a Mercury Mariner take?

What kind of oil does a Mercury Mariner take?

Engine Oil

Viscosity:	5W-20 (All TEMPS)
Capacity:	4.8 quarts. . . . (with filter)After refill check oil level.
Torque:	21 ft/lbs (Oil Drain Plug)

How do you change the oil on a Mercury Mariner?

Starts here3:21How To Change Oil Ford Escape Mercury Mariner Mazda Tribute …YouTubeStart of suggested clipEnd of suggested clip37 second suggested clipAnd take off our drain plug which is right here break that loose. Which i already had pre-loosenedMoreAnd take off our drain plug which is right here break that loose. Which i already had pre-loosened slide your pan in here. And then take out your drain plug and drain your oil.

What type of oil do a 2009 Mercury Mariner take?

Mercury Mariner 2009, Special Tec™ SAE 5W-20 Full Synthetic Motor Oil, by Liqui Moly®.

How much oil does a 2008 Mercury Mariner v6 take?

6 quarts
Engine Oil 6 quarts (with filter)After refill check oil level.

What kind of oil does a Mercury Mariner 2008 take?

Mobil 1 Extended Performance Synthetic Motor Oil 5W-20 1 Quart.

How much oil does a 2006 Mercury Mariner take?

Capacity: 6 quarts. . . . (with filter)After refill check oil level.

How do you reset the change oil light on a Mercury Mariner?

How to reset oil service light Mercury Mariner.

1. Turn the ignition to run, one position before starting engine.
2. Press the SET control to access the system check function.
3. Press and release the SETUP control to display “OIL LIFE = XXX% HOLD RESET = NEW”.
4. Press and hold the RESET control for two seconds and release.

How do you change the oil on a 2010 Mercury Mariner?

Starts here12:21How to change the oil in your 2010 Mercury Mariner – YouTubeYouTube

How much oil does my Mercury Mariner need?

Capacity: 6 quarts (with filter)After refill check oil level.

How much oil does a 2009 Mercury Mariner hold?

5 quarts
Engine Oil

Viscosity:	5W-20 (All TEMPS)
Capacity:	5 quarts (with filter)After refill check oil level.
Torque:	21 ft/lbs (Oil Drain Plug)

How do you reset the change oil light on a 2008 Mercury Mariner?

2008-2011

1. Press and release the SETUP button to display “Oil Life XXX% Hold Reset = New”
2. Press and hold the RESET button for 2 seconds and release to reset oil life to 100%

What kind of oil goes in a 2008 Mercury Mariner?

Mercury Mariner 2008, Pro High Performance™ SAE 5W-20 Synthetic Blend Motor Oil, 1 Quart by Amalie Oil®.