What primer for AWlgrip?

545 epoxy primer
The correct primer for both Awlgrip polyester urethane and AwlCraft 2000 acrlyic urethane topcoats, 545 epoxy primer is available in Gray and White. (Awlgrip D8001, D3001 and D1001 primers). Mix in a 1:1 to 1 1/2 ratio with Converter and apply by spray, brush, or roller.

How do you Mix AWlgrip primer?

The mix ratio is 1:1 so if you purchase 1 quart of primer you also need 1 quart of converter for a total of 2 quarts. Additionally you need to purchase the appropriate reducer (spray or brush) for spraying reduce up to 25% with T0006 and for brushing reduce up to 10% with T0031.

What do you use over epoxy primer?

Alternatively, you can apply filler or primer surfacer over the epoxy to fill any minor imperfections and block flat before you paint. 3. Stacking Coatings – Since epoxy primers adhere mechanically, they will grab onto most anything that has a good texture to the surface.

What is high build primer?

High-Build Primer Surfacer is a flexible acrylic coating for priming steel, aluminum, urethane, fiberglass and plastics. FEATURES. • Provides superior adhesion. • Excellent filling properties. • Works on flexible or rigid substrates.

Is awlgrip a part 2?

Mixing and Reduction: This is a two part system. You must order the base primer in either gray or white along with the D3001 Converter in the appropriate size.

How long can you wait to paint over epoxy primer?

Epoxy primer has a 72 hour re coat. Product sheet says recoat after an hour I think. Spraying DBU base coat over that. Got done with epoxy about half an hour ago, so will wait another hour or two and shoot the base.

Does epoxy primer need to be sanded?

If the thinner/reducer rag does not have any epoxy primer transfered to it then the epoxy is “cured” and needs to be sanded. Also at that point the epoxy will not plug up the sandpaper anymore either.