What size nut is 5 16?
US Nut Size Table
| Size | Diameter* | Height |
|---|---|---|
| Hex Nut | Hex Nut | |
| 5/16″ | 1/2″ | 17/64″ |
| 3/8″ | 9/16″ | 21/64″ |
| 7/16″ | 11/16″ | 3/8″ |
What size nut fits a 5/16 socket?
Hex Bolt, Lag Bolt, Square Bolt and Heavy Hex Bolt
| US Bolts | |
|---|---|
| Bolt Diameter (in) | Head and Wrench Size (in) |
| 1/4 | 7/16 or 3/8 |
| 5/16 | 1/2 |
| 3/8 | 9/16 |
How do you size a nut?
Place the end of a measuring tape on one of the flat sides of the nut’s outer perimeter. Stretch the tape measure across the nut’s diameter to the flat-side directly across from the one your pulling from. If the nut is metric, count the number of lines on the tape measure to find the measurement.
How are hex nuts sized?
Hex nut size refers to its nominal thread diameter. Typically, sizes range from 1/4″ to about 2 1/2″. Size is specified in inches, usually fractional rather than decimal. Table 1 lists width across flats and across corners, and thickness.
What is the next size up from 5 16?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 1/8″ | 8mm | 5/16″ |
| 3/16″ | 10mm | 3/8″ |
| 1/4″ | 11mm | 7/16″ |
| 5/16″ | 13mm | 1/2″ |
What size head does a 5/16 bolt have?
Hex Bolt Head Size Chart
| Diameter | Head Size |
|---|---|
| 5/16″ | 1/2″ |
| 3/8″ | 9/16″ |
| 7/16″ | 5/8″ |
| 1/2″ | 3/4″ |
How wide are nuts?
Dimensions of Heavy Hex Nuts ASME B18. 2.2 used with Stud Bolts ASME B16. 5
| SIZE | Width Across Flats | |
|---|---|---|
| 1 | 1.5/8 | 1.625 |
| 1.1/8 | 1.13/16 | 1.812 |
| 1.1/4 | 2 | 2.000 |
| 1.3/8 | 2.3/16 | 2.188 |
How do you measure lock nut size?
If you measured at 50mm the size is 50 divided by 5, this gives us an 10 sized lock nut , 30mm would give us an 6 sized lock nut (30/5=6). To measure a lock nut simply measure it’s bore and then divide the measurement by 5.
What is a 16 mm in standard size?
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 15mm | Just short of 5/8 Inch | 0.59055 Inches |
| 16mm | 5/8 Inch | 0.62992 Inches |
| 17mm | Just short of 11/16 Inch | 0.66929 Inches |
| 18mm | Just short of 3/4 Inch | 0.70866 Inches |