What size ring gear does a Dana 44 have?
8.5 inches
Ring gear diameter is 8.5 inches, while next-generation axles go up to 8.8 inches. The available gear spreads for the Dana 44 range from 2.72:1 to 5.89:1, and both five- and six-lug versions were used in OE applications.
Are all Dana 44 gears the same?
Dana 44 front axles have either standard or reverse-cut gears. However, JK Wrangler rear axles use an 8.8-inch ring gear with a Dana 60-sized pinion shaft. The JK axle is still referred to as a Dana 44, but neither the differential nor the ring-and-pinion are compatible with older Dana 44s.
What size axle is a Dana 44?
The Dana 44 came with axle tubes anywhere from 2.5 to 3-inch in diameter. The Dana 60 only came with one axle diameter of 3.125 inches, which is pretty big.
How many bolts does a Dana 44 have?
Spicer (Dana) 44 axles use an 8-1/2-inch ring gear bolted to the carrier by 10 bolts that are 3/8 x 24 right-hand thread. The case itself is 9-3/8 inches in diameter. The cement mixer-shaped differential cover also has 10 bolts.
Is the Dana m210 the same as a Dana 44?
They’re both the “same”.
How do I know what gear ratio My Dana 44 has?
If it hasn’t been regeared, look at the tag bolted to the cover. It will tell you the ratio. Below is a pic. (this one is 3.73) Or count the ring and pinion teeth and divide the number of ring teeth by the number of pinion teeth.
Is Dana 44 strong?
It used to be that the Dana 44 was considered to be a fairly stout axle. But as trails got tougher and tires got larger, the 44 got dumped in favor of even stronger hardware. But the Dana 44 is a pretty stout piece, and many companies offer parts to make your 44 even stronger than it now is.
Is a Dana 44 a 10 bolt?
Even then, you may be better off selling them. It’s marginally weaker than a GM or FSJ open-knuckle Dana 44. However, almost all the 10-bolt knuckle components and stub shafts interchange with the open-knuckle Dana 44. It’s a usable full-width axle, but we’d prefer a Dana 44.
How can you tell the difference between a Dana 44 and a 10 bolt?
Starts here11:09Dana 44s vs. Chevy 10-Bolt Front Axles: Which Is Better?YouTube
What does a Dana 44 U joint kit include?
Description: Kit includes: 4 caps 4 snap rings 4 O-rings 4 zerk fittings. This is for ONE joint only!! Description: Adapts 3/8″ to 7/16″ ring gear bolts. Description: These are factory Dana spicer Dana 44 U Joints these are the strongest stock U Joints available. Forged cross non greasable.
What are the strongest dana u joints available?
Description: These are factory Dana spicer Dana 44 U Joints these are the strongest stock U Joints available. Forged cross non greasable. Spicer part # 5-760x Description: These are factory Dana spicer Dana 30 U Joints these are the strongest stock U Joints available. Forged cross non greasable.
What are the features of the ARB Dana 44 diff cover?
Description: ARB® #0750003 Diff Cover Features The ARB Dana 44 diff cover is engineered to protect your ARB air locking differential. Made of high tensile, solid nodular iron, and powder coated red. This ARB… More Details »
What kind of bearings do you have for 22404 5x?
Description: 22404-5X Original Equipment Dana Spicer – Dana 44 4.56 – Ring and Pinion. Description: These bearings are perfect for the master installer or the first timer. The race is machined to allow one to slide the race in and out of the housing allowing you to easily change the pinion shim… More Details »