What type of oil does a 2010 Toyota Prius take?
The 2010 Toyota Prius oil type and capacity is 0w-20 and 4.4 quarts. Having high quality oil is important for the engine to run smoothly.
How often should you change the oil in a 2010 Prius?
For oil and filter changes, Toyota recommends every 10,000 miles or one year; whichever comes first. Here is a link to the maintenance booklet that outlines all of the maintenance items for your Prius.
How much oil does a Toyota Prius take?
Model: Toyota Prius, XW20 (2004 – 2009) (USA)
| 1 | 2 | |
|---|---|---|
| Prius (CAN) (NHW20) (2004 – 2005) | 1NZ-FXE | 3.7 l 3.91 US Quarts / Filter: 0.3 l 0.32 US Quarts |
| Prius (USA) (NHW20) (2006 – 2009) | 1NZ-FXE | 3.7 l 3.91 US Quarts / Filter: 0.3 l 0.32 US Quarts |
| Prius (CAN) (NHW20) (2006 – 2009) | 1NZ-FXE | 3.7 l 3.91 US Quarts / Filter: 0.3 l 0.32 US Quarts |
Does a 2010 Toyota Prius require synthetic oil?
Synthetic engine oil 0W20 required in 2010-2017 model year Prius models. Driving on dirt roads or dusty roads: Replace engine oil and oil filter.
Can I use 5w30 in Prius?
Yes, the Valvoline SynPower 5W-30 Full Synthetic Motor Oil – 5qt (787007) is suitable for use in any vehicle requiring an API SL rated 5w-30 oil, including your Prius. As long as your car requires 5w30 motor oil, this will work.
How many quarts does a 2010 Prius take?
4.4 quarts
4.4 quarts. . . . (with filter)After refill check oil level.
How often should you change the oil in a Toyota Prius?
How long does an oil change take on a Toyota Prius?
Watch video above for an overview of the oil change steps. The oil change on these late model Toyota Prius’s usually takes around 25-35 minutes. Using a car lift and having all your parts and tools lined out in a clean work area will make the job even faster.
How do I remove the oil cap from my Prius?
If you are using a car lift: Wait to lift the car until you complete the following steps. Prius on car lift at a self serve garage. Opening hood and removing oil cap. Set the parking brake and pull the hood release. Open the hood of the car and set the hood prop rod in place to keep it open. Locate the oil cap and remove it.
What to do if your Prius has low oil pressure?
Motivx Pro Tip: Start your Prius and let the engine run for a few seconds to build oil pressure and fill the oil filter. Then shut off your engine and top off the oil, checking the dipstick until it is at the full mark. Then re-install the oil cap and lower the hood.
How do I change the oil filter on my Toyota Corolla?
Replace the paper filter cartridge and the large o-ring at the base of the filter cap threads. Take a bead of fresh oil on your finger and apply it to the large o-ring. Tighten the oil filter on by hand and get it firmly snug. You can then use the oil filter wrench to make sure it is snug, but be very careful not to over-tighten the housing.