Which Australian standard applies to EWPs?
Major inspections are a strip, thorough inspection and re-build of the EWP at the end of the design life. The design life should be 10 years as stipulated by the Australian Standard AS/NZS 1418.10:2011 Cranes, hoists and winches – Elevating work platforms.
What are the basic maintenance requirements for EWP?
EWPs should be subjected to a major inspection for continued safe use after 10 years of service, and every 5 years thereafter. functions, or ▪ a competent person recommends it due to issues identified during other inspections.
What is an elevated platform?
Elevated platform or perching area: A surface or structure, either natural or manmade, positioned above the floor, or above the grade level of the cage or enclosure, that will provide a resting area for the animal(s).
Do you need a spotter for an EWP?
A rescue plan for the EWP is as simple as having a spotter keeping an eye on the operator. However they must be trained in how to lower the EWP in the event of an emergency. The spotter is allowed to perform other duties while they are acting as a spotter. 4.3 Other PPE.
How long is elevated work platform good for?
FOR HOW LONG IS MY AERIAL LIFTS & AERIAL WORK PLATFORM CERTIFICATION VALID? Your certification from Go Safety is valid for five years. However, you may be required to recertify sooner depending on provincial/territorial legislation or your company’s health and safety policies.
What is RIIHAN301E?
RIIHAN301E – Operate Elevating Work Platform under 11 metres teaches the skills and knowledge required to operate an elevating work platform in the Resources and Infrastructure Industries. RIIHAN301E – Operate Elevating Work Platform (EWP) under 11 metres is appropriate for those working in operational roles.
How often should Mewp be inspected?
every six months
Inspection, maintenance and examination The MEWP must be thoroughly examined at least every six months by a competent person or in accordance with an examination scheme drawn up by such a competent person.
How often should a detailed maintenance inspection be conducted?
every three months
Routine inspections should be undertaken in accordance with manufacturer’s recommendations but at least every three months.
What is the most common risk of working in an elevated platform?
7 Most Common Aerial Lift Safety Hazards. OSHA states that the top hazards associated with aerial lifts are electrocutions, falls from elevations, tip-overs, collapses, being struck by falling objects, ejections from an aerial lift platform, entanglement, and contact with ceilings, power lines, and other objects.
What are the work platform that enable worker to work on higher elevation?
Mobile Elevated Working Platforms (MEWPs) Boom MEWPs – also known as cherry pickers. These have extendable booms which can extend out to access difficult areas, where a vertical machine would not be suitable. Workers work in the basket of the machine and are elevated or lowered to/from the work area.
Does EWP include working at heights?
EWP tickets are licences to operate Elevated Work Platforms. The nature of this title can often confuse new people entering the industry, with an alternate qualification – working safely at heights. There’s also a different licence required again for working with elevated work platforms over 11m.
Are the work platform that enable worker to work on higher elevation?
What is an elevating work platform?
An elevating work platform uses a telescoping device, hinged device, articulated device or any combination of these to raise personnel, equipment or materials to perform work. Note: elevated work platforms less than 11 metres in length are not included in this definition. Apply for a high risk work licence.
What licence do I need to operate a boom type elevating platform?
To operate a boom type elevating platform you need a WP high risk work licence. An elevating work platform uses a telescoping device, hinged device, articulated device or any combination of these to raise personnel, equipment or materials to perform work. The length of the boom is the greater of either the:
What are the requirements to safely operate an EWP?
Requirements to safely operate EWP include: lock-out procedures that exclude worker access to faulty machines. The operator of an EWP must ensure: operation is authorised and in accordance with the safe work procedure