What does delete all secure boot variables do?

What does delete all secure boot variables do?

Delete All Secure Boot Keys. If you select this option and then Yes, Secure Boot will be changed from the usual User mode to Setup mode. In this mode, Secure Boot is disabled and the option changes to Install All Factory Default Keys.

How do I restore a secure boot to factory settings?

1. Boot into Bios (F2)
2. Then select the Boot Tab.
3. Secure boot to Enabled.
4. Move over to Security Tab.
5. Click Secure Boot Configuration.
6. Click Enter next to Reset to Manufacturing Default.
7. On the Load Default Secure Variables popup , choose yes.
8. Press ESC key.

How do I enable all factory keys?

Go to Win 8 Configuration>Secure Boot Support>Secure Boot Mode, then set to Custom. Open Key Management. Select Enroll All Factory Default Keys and select Yes. Once the keys are enrolled, the keys will show up as INSTALLED.

How do I disable CSM MSI?

Find CSM under BIOS or Security menu depending on your motherboard, and double click on it. Click on ‘Disabled’. CSM will now be turned off on your Gigabyte motherboard.

What happens if you disable UEFI Secure Boot?

Secure Boot is an important element in your computer’s security, and disabling it can leave you vulnerable to malware that can take over your PC and leave Windows inaccessible.

How do I fix a security boot failure?

Re-enable Secure Boot Open the PC BIOS menu: You can often access this menu by pressing a key while your PC is booting, such as F1, F2, F12, or Esc. From Windows, hold the Shift key while selecting Restart. Go to Troubleshoot > Advanced Options: UEFI Firmware Settings.

How can I enroll in EFI image?

If you want to enroll an EFI image, select Enroll Efi Image and press Enter. On the Select a File System screen, Scroll through the list and select the file system that contains the EFI file and press Enter.

What is factory secure key provisioning (fskp)?

Factory Secure Key Provisioning(FSKP) is a technique for securely burning fuses on the factory floor. The fuse data contains sensitive device and encryption keys that establish the root of trust on the target device. FSKP protection is important because the factory floor may not have a high level of security and can pose security risks.

What to do when a client is left in provisioning mode?

If a client is left in provisioning mode, use this manual process to return the client to normal operation. One of the changes made by this WMI method is setting a registry value, but it makes other changes as well. Just changing the registry value doesn’t fully take the client out of provisioning mode.

What is the initial setup of the provisioning service?

There is a one-time initial setup of the provisioning that must occur, which is usually handled by the solution operator. Once the provisioning service is configured, it does not have to be modified unless the use case changes. After the service has been configured for automatic provisioning, it must be prepared to enroll devices.

What is the default provisioning mode timeout value for a device?

48 hours is the default provisioning mode timeout value. You can adjust this timer on a device by setting the ProvisioningMaxMinutes value in the following registry key: HKLM\\Software\\Microsoft\\CCM\\CcmExec.