How do I connect my Canon Pixma printer to Wi-Fi?

How do I connect my Canon Pixma printer to Wi-Fi?

Connecting Device to Printer

1. Turn on wireless communication on your computer or smartphone. For Android or iOS, enable “Wi-Fi” on your device’s “Setting” menu.
2. Select “XXXXXX-iP110series” (“XXXXXX” represents last six digits of printer’s MAC address.) from SSID list displayed on device.
3. Enter password.

How do I connect my laptop to my Canon printer wirelessly?

Press and hold the Wi-Fi button on the printer-top till the lamp flashes once. Step 2: The lamp next to the WiFi button also flashes blue. After this, go to the access point and press the WPS button within two minutes. As the connection between laptop and printer appears, flashing of Wi-Fi lamps and power will stop.

How do I connect my Canon Pixma mg6450 to WiFi?

Step 1

1. Press the [Home] button (A) on the printer.
2. Step2.
3. Use the [ ] buttons (A) to select the [WLAN ] icon.
4. When the screen below appears select [Wireless LAN Setup] and press [OK].
5. Press and hold the [WPS] button on your access point for approximately 5 seconds, then release.

How do I connect my Canon ts3120 printer to WIFI?

1. Start Easy Wireless Connect on your printer

1. If the ON lamp (A) on the printer is flashing, press the Stop button (B).
2. Press and hold the Direct button (C) on the printer, then release the button when (D) flashes.
3. Make sure the wireless icon.
4. Follow the next set of steps to download and run the file.

What is WPS button on printer?

The WPS method OR (push button method) is an easy and quick method of connecting the printer’s to the wireless router / access point or gateway. Generally, the way it works is that you press this button on the printer first and then on the router within 2 minutes for the both the devices to connect to each other.