How do you control a rover in KSP?
By default, a rover is controlled with the keys W , A , S , & D . Unfortunately these keys also control vehicle rotation, which can make a rover completely uncontrollable on planets with low gravity.
How do I change controls in KSP?
Currently the only way to adjust the controls (or even view them) is to exit to the main menu. This makes for slow feedback particularly when configuring the dead zone and sensitivity of the joystick which takes some back and forth to get right.
How do you get a Mun base in KSP?
Start by placing a command module on top of your Mun capable rocket. It can be manned or unmanned, but this module should act as your initial command center for your base. Include at least one docking port. Once you have completed this module, place it on the BOTTOM of the rocket stage that will land it on the Mun.
What is traction control in KSP?
The traction control value can be tailored to individual vehicles to prevent wheelspin in different conditions. Traction control can be overridden and a manual limit to the motor output set. Friction control can be overridden and adjusted on a scale from 0.1-5.0.
What are the controls for KSP?
Key Bindings for QWERTY keyboard layout
| Key | Effect | Since |
|---|---|---|
| System/UI Controls | ||
| Left-Shift | Increase throttle | 0.07.3 |
| Left-Control | Decrease throttle | 0.07.3 |
| Space | Launch or detach stage | 0.07.3 |
What are the RCS controls KSP?
The Reaction Control System, commonly called RCS, is a method to control your spacecraft. It is used for pointing a direction, doing a rendezvous or even propelling in space / low gravity situation.
How do I control a rover with WASD?
Another solution is to switch into docking mode when controlling a rover. Using docking controls, as opposed to staging controls, it is possible to quickly switch which keys to control the translation and rotation. When the controls are in “ROT” mode the WASD controls rotate the rover, which can be switched with space.
How do you control a rover with a keyboard?
Another solution is to switch into docking mode when controlling a rover. Using docking controls, as opposed to staging controls, it is possible to quickly switch which keys to control the translation and rotation. When the controls are in “ROT” mode the W A S D controls rotate the rover, which can be switched with space.
How do I map the Rover controls to a number pad?
As a workaround for this problem, the rover controls can be remapped to different keys in the Settings menu. If a number pad is available, a good solution is to map the W A S D drive controls to 8 4 5 6 on the numpad. Another solution is to switch into docking mode when controlling a rover.
How do you pilot a rover on a low gravity planet?
Piloting rovers. By default, a rover is controlled with the keys W, A, S, & D. Unfortunately these keys also control vehicle rotation, which can make a rover completely uncontrollable on planets with low gravity. As a workaround for this problem, the rover controls can be remapped to different keys in the Settings menu.