How do you reset the toner level after installing a new cartridge?

How do you reset the toner level after installing a new cartridge?

Press the Menu> button until Reset Toner Lvl appears on the display and then press the Select button. Press the Menu> button to scroll through each of the four colors that are to be reset. When the appropriate color is represented on the display by the Reset message, press the Select button to actually reset the level.

How do you reset the toner on a Brother HL L2370dw?

How to Reset Toner on Brother HL-L2370dw Printer

1. With power ON, open the front cover.
2. Press BACK and GO buttons at the same time.
3. Press BACK button only one more time.
4. Press down arrow to select TNR-HC (for high yield toner)
5. Press OK.
6. Press down arrow to confirm ACCEPTED.
7. Close front cover and you should be good to go!

How do you replace Toner on Brother printer?

In order to replace the toner cartridge, make sure that the printer is turned on. Now, open the front cover of your Brother Printer. Now, remove the toner cartridge and drum unit assembly from the machine. And push down the green lock lever and remove the toner cartridge out of the drum unit of printer.

How to change toner in Brother printer?

Turn off the printer power switch.

Fully open the top cover by lifting up on the handle (1).

See the print sample to identify the color causing the problem. The color of the spots is the color of the drum you…

We recommend that you place the drum unit and toner cartridge assembly on a clean, flat surface with a sheet of…

To prevent damage to the printer from static electricity, DO NOT touch the electrodes shown in the illustration.

Push down the green-labeled lock lever (1) and take the toner cartridge out of the…

How do you reset your brother printer?

Method 1: Turn the Brother printer off and then wait for a few minutes. Open your printer’s cover by either lifting it or lifting a lever on the side. Press the “Cancel” and “Print” buttons at the same time on the printer and then press the “+” button. Press the “OK” or “Enter” key to complete the reset option.

How to replace brother toner cartridge?

Make sure the machine is turned on.

Open the front cover.

Remove the toner cartridge and drum unit assembly from the machine.

Push down the green lock lever and take the toner cartridge out of the drum unit.

Unpack the new toner cartridge.

Remove the protective cover.