How do you write a Loto program?

How do you write a Loto program?

How to write your LOTO procedures

1. Step 1: Preparing for shutdown.
2. Step 2: Review the specific LOTO procedure for the asset.
3. Step 3: Performing the shutdown.
4. Step 4: Locating and disconnecting all energy sources.
5. Step 5: Placing locks and tags.
6. Step 6: Releasing or blocking any stored energy.
7. Step 7: Verifying the lockout.

What are the 6 steps of Loto?

Let’s look at each of these steps of LOTO safety more closely in the sections below.

• Lockout/Tagout Step 1: Preparation.
• Lockout/Tagout Step 2: Shut Down.
• Lockout/Tagout Step 3: Isolation.
• Lockout/Tagout Step 4: Lockout/Tagout.
• Lockout/Tagout Step 5: Stored Energy Check.
• Lockout/Tagout Step 6: Isolation Verification.

What is a Loto program?

The control of hazardous energy, commonly called a Lockout/Tagout (LOTO) Program, protects workers from injury or death due to the unintended start up or release of stored energy while they are performing maintenance and repair on machines, processes, and systems.

Who can train Loto?

1. Authorized employees. As a general rule, this group might include your electricians, maintenance personnel, and some machine operators. These workers are the only ones allowed by OSHA to perform LOTO.

When should I use LOTO?

When maintenance professionals enter a hazardous area of a machine to perform routine work, the lockout/tagout program must be used. Large machinery often needs to have fluids changed, parts greased, gears replaced, and much more.

How do you release stored energy?

A coiled or compressed spring will release stored energy in the form of fast movement when the spring expands. pressurized by an outside source. When under pressure, the fluid can be used to move heavy objects, machinery, or equipment. Examples: grain truck beds, power presses, vehicle braking systems.

What is lockout/tagout (Loto) procedure template?

Lockout/Tagout (LOTO) Procedure Template Pub-3000, Chapter 18, Work Process N addresses LOTO Procedures. A LOTO procedure is a formal document detailing all the steps required to establish the lockout. It is specific both to the equipment or system and to the scope of work.

Which Loto procedures are required for complex Lotos?

A LOTO procedure is required for all complex LOTOs. The LOTO procedure fulfills the following purposes: It documents the scope of work permitted under the LOTO. It documents the specific isolations established by the LOTO.

What is the standard format for Loto procedures in Berkeley Lab?

All Berkeley Lab LOTO procedures must follow the standard format included in the Lockout/Tagout (LOTO) Procedure Template. Existing LOTO procedures are acceptable until FY16, after which they must be converted to the standard format in the Lockout/Tagout (LOTO) Procedure Template.

What is a Loto procedure in pubpub?

Pub-3000, Chapter 18, Work Process N addresses LOTO Procedures. A LOTO procedure is a formal document detailing all the steps required to establish the lockout. It is specific both to the equipment or system and to the scope of work. A LOTO procedure is required for all complex LOTOs.