What engine does a Peugeot 307 have?
| Peugeot 307 | |
|---|---|
| Powertrain | |
| Engine | petrol: 1.4 L ET3 I4 1.6 L TU5 I4 2.0 L EW10 I4 diesel: 1.4 L DV4 HDİ I4 1.6 L DV6 HDi I4 2.0 L DW10 HDi I4 |
| Transmission | 5-speed manual 6-speed manual 4-speed ZF 4HP20 automatic 6-speed Aramox AF40/Aisin TF80SC automatic |
| Dimensions |
What would cause a car window to stop working?
If only one window stops working, the problem could be a bad relay, fuse issue, bad motor, or the power window switch has failed. The most common reason for one window to stop working is the switch, so this should be looked at by a professional mechanic to have your power window switch replaced.
How do I reset my Peugeot 307 BSI?
Peugeot BSi reboot procedure
- Disconnect the diagnostic tool.
- Put the driver’s window down, lift the bonnet and ensure all.
- Ensure all doors are closed and remove key from the.
- Wait for 3 minutes, disconnect the vehicle battery and wait.
- Reconnect the vehicle battery, wait a further 10 seconds (do.
What is the best engine for a Peugeot 307?
All petrol engines (1.4, 1.6 and 2.0) are fairly lively, but a little unrefined. The 1.6 is the best mix of performance and economy. The 2.0 litre engine is offered with 140bhp and more recently with 180bhp in the Feline model, although with near identical torque outputs they feel similar on the road.
Are there any problems with the Peugeot 307cc?
Have a look on this map of independent Peugeot drivers & owner with diagnostic equipment which just diagnoses Peugeots, and find the person closest to you, you’ll save a fortune. The 307cc isn’t a bad car. The most common roof problems are with the microswitches, especially on the boot load liner.
How to fix a broken window switch on a Peugeot?
Perhaps a visit to a Peugeot scrapyard will fix your problem. One thing you could try is removing the switch plate from the door and seeing if the passenger window switch can be plugged into the drivers window and test with that switch. I have not tried to see if this is possible and depends on the plugs used.
Why does my Peugeot 206 run rough from cold?
Rough running from cold on these early 2.0 16valve engines is a known issue and is often caused by sticking hydraulic tappets.Peugeot did a rework on the camshafts and lifters to reduce the problem.Make sure the correct grade and a good quality engine oil is used.